Beading Projects

Long Iridescent Drop Earrings

Don’t you just love these beads? They come in two shades – blue and green – and they have a wonderful iridescent sheen on the outside.  As soon as I saw them, I fell in love! You’ll hear that a lot from me about beads!

I decided to make these really quick and easy earrings, although I have other things in mind for them too.  What would you make with them?

I also made them in green.

This project is suitable for beginner jewelry makers.

If you would prefer to watch a video of me making these earrings, scroll to the end.


To make these earrings you will need:


You will also need:

  • Chain or bent nose pliers
  • Round nose pliers


Adding The Beads

Start by adding the bead cap to the eye pin. Make sure the outer curve of the bead cap is at the bottom so that it will cup the curve of the bead.

Beading tutorial image 1

Next add the iridescent bead with the wider end down.

Beading tutorial image 2

Then add the filigree bead ensuring that it is centered on the eye pin. Check this by rotating the bead with your finger.

Beading tutorial image 3

Finally, add two seed beads.

Beading tutorial image 4

Making The Loop

Take your bent (or chain) nose pliers and bend the eye pin at right angles to the rest of the work.

Beading tutorial image 5

Place the top of the eye pin between the jaws of your round nose pliers, making sure that the top is flush with the jaws (doesn’t poke out over the top).

Beading tutorial image 6

Rotate the pliers away from you until your wrist won’t go any further.

Beading tutorial image 7

Reposition the pliers so that the loop is on the lower jaw and rotate again until the loop is closed. If necessary, hold the loop with the chain nose pliers and reposition until the eye pin is centered under the loop.

Beading tutorial image 8

Attaching The Earwire

Open the loop at the bottom of the earwire by grasping it along the side with the chain nose pliers.  Rotate up towards the ceiling. Never open a loop to the side or you will lose the nice round shape.

Beading tutorial image 9

Place the loop of the earring component onto the loop of the earwire and close the loop by rotating down toward the floor, making sure the loop sits closed. Rotate back and forth with a little pressure if necessary, to get it to sit nice and tight.

Beading tutorial image 10

Repeat for the other earring.

Beading tutorial image 11

These earrings are easy to make but they pack a real punch.

If you make these earrings let me know in the comments below or pin this image to make them later.

If you love jewellery, I strongly encourage you to have a try at making these earrings.  If you need any help, let me know – I’d be happy to help.

Beading tutorial cover image

Thank you for subscribing to our mailing list.
Oops! Something went wrong while submitting the form.